{"title":"24V Pressure Pumps","description":"\u003ch2\u003eWhat are 24V pressure pumps and what are they used for?\u003c\/h2\u003e\n\u003cp\u003e24 V pressure pumps are compact devices—usually diaphragm type—designed to maintain \u003cstrong\u003econstant pressure\u003c\/strong\u003e in the water network using 24 V battery banks. Compared to 12 V, they operate at \u003cstrong\u003elower current\u003c\/strong\u003e for the same power, which reduces losses in the wiring and allows for longer lines, a key factor in \u003ca href=\"\/en\/collections\/bombas-de-agua\"\u003esolar systems\u003c\/a\u003e for residential, marine, and camper applications. In this collection you will find models with flow rates from 2–19 l\/min, pressures from 30–100 PSI, integrated pressure switch, and self-priming for convenient and efficient use.\u003c\/p\u003e\n\n\u003ch3\u003eAdvantages and limitations\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElectrical efficiency\u003c\/strong\u003e: lower current than at 12 V, less voltage drop, and better use of existing cable.\u003c\/li\u003e\n  \u003cli\u003eSimple installation: compact format, \u003cstrong\u003eself-priming\u003c\/strong\u003e, and accessible maintenance.\u003c\/li\u003e\n  \u003cli\u003eComfort: compatible with \u003cstrong\u003eexpansion tank\u003c\/strong\u003e to reduce cycles, noise, and water hammer.\u003c\/li\u003e\n  \u003cli\u003eLimitations: do not replace a \u003ca href=\"\/en\/collections\/bombas-sumergibles\"\u003esubmersible pump\u003c\/a\u003e for high lift or a \u003ca href=\"\/en\/collections\/depuradoras-de-piscina\"\u003epool filter\u003c\/a\u003e; their function is to pressurize the internal network.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIsolated and off-grid homes: supply for taps\/showers with intermediate tank and compatible water heater.\u003c\/li\u003e\n  \u003cli\u003eMarine and camper: pressurized water with moderate consumption and low noise level.\u003c\/li\u003e\n  \u003cli\u003eLight irrigation, pressurized transfers in nearby tanks, and remote points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to choose\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow rate\u003c\/strong\u003e (l\/min): 6–10 l\/min for 1–2 simultaneous points; 12–19 l\/min for 2–3 points.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure\u003c\/strong\u003e (PSI\/bar): 30–60 PSI covers most uses; up to 100 PSI if your installation requires it.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUsage profile\u003c\/strong\u003e: intermittent (typical for taps\/showers). Add an \u003cstrong\u003eexpansion tank\u003c\/strong\u003e (20–50 L) for fewer starts and longer pressure switch life.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElectrical installation\u003c\/strong\u003e: cable section according to current and length; suitable DC fuse or circuit breaker.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWater quality\u003c\/strong\u003e: install a \u003ca href=\"\/en\/collections\/accesorios-para-bombas\"\u003efilter\u003c\/a\u003e on suction (≈50 µm) to protect the diaphragm and valves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIndicative technical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e24 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTypical flow rate\u003c\/td\u003e\n\u003ctd\u003e2–19 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOperating pressure\u003c\/td\u003e\n\u003ctd\u003e30–100 PSI (≈2–6.9 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eIntegrated pressure switch\/press-control\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eSelf-priming (depending on suction height)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAccessories\u003c\/td\u003e\n\u003ctd\u003eExpansion tank 20–50 L, 50 µm filter, check valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eBest practices\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePlace the pump near the tank and, if possible, below the water level to facilitate priming.\u003c\/li\u003e\n  \u003cli\u003eUse flexible hoses and anti-vibration mounts to reduce noise.\u003c\/li\u003e\n  \u003cli\u003eBleed the line at first start-up and periodically check connections and diaphragm condition.\u003c\/li\u003e\n  \u003cli\u003eAdjust the cut-off pressure (if adjustable) according to the internal network and water heater.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eComparisons and related accessories\u003c\/h3\u003e\n\u003cp\u003eIf your installation is very compact or has short wiring, you may consider \u003ca href=\"\/en\/collections\/bombas-de-presion-12v\"\u003e12V Pressure Pumps\u003c\/a\u003e. With a 230 V grid\/inverter, check \u003ca href=\"\/en\/collections\/bombas-de-presion-de-alterna\"\u003eAC Pressure Pumps\u003c\/a\u003e. For photovoltaic integration with batteries, also see \u003ca href=\"\/en\/collections\/bombas-de-presion-solares\"\u003eSolar Pressure Pumps\u003c\/a\u003e. Complete the installation with \u003ca href=\"\/en\/collections\/accesorios-para-bombas\"\u003eaccessories\u003c\/a\u003e (Ibaiondo expansion tanks, filters, protections) and keep \u003ca href=\"\/en\/collections\/repuestos-para-bombas\"\u003espare parts\u003c\/a\u003e available. Return to the main collection \u003ca href=\"\/en\/collections\/bombas-de-presion\"\u003ePressure Pumps\u003c\/a\u003e to see all options.\u003c\/p\u003e","products":[{"product_id":"bomba-shurflo-8005-952-480-90psi","title":"Shurflo Pressure Pump 24\/36V 1.37 l\/min 90 PSI 8005-952-480","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eShurflo Pressure Pump 24\/36V 1.37 l\/min 90 PSI 8005-952-480\u003c\/strong\u003e is a 3-chamber diaphragm pump designed as a \u003cem\u003ebooster\u003c\/em\u003e for \u003cstrong\u003ereverse osmosis (R.O.)\u003c\/strong\u003e systems and other technical applications where it is necessary to increase pressure with a controlled flow rate and external control. It operates at 24\/36 VDC, does not include an internal pressure switch, and offers an \u003cstrong\u003e80–110 PSI bypass\u003c\/strong\u003e that protects the system in case of closures or restrictions in the line. Its positive displacement architecture ensures a stable flow, and its construction with a Nylon body, EPDM valves, and Santoprene diaphragm provides excellent chemical resistance and long service life in continuous operation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVersatile power supply \u003cstrong\u003e24\/36 VDC\u003c\/strong\u003e with permanent magnet motor (P\/N 11-147-13).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo pressure switch\u003c\/strong\u003e: controlled by external pressure switches, low\/high pressure switches, or by the R.O. system electronics.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInternal bypass 80–110 PSI (max.)\u003c\/strong\u003e to limit overpressure in the line.\u003c\/li\u003e\n  \u003cli\u003eNominal flow rate \u003cstrong\u003e1.37 l\/min\u003c\/strong\u003e, perfect for small\/medium size R.O. membranes.\u003c\/li\u003e\n  \u003cli\u003eHydraulic ports \u003cstrong\u003e3\/8\"-18 NPT female\u003c\/strong\u003e for direct connection to hose or pipe.\u003c\/li\u003e\n  \u003cli\u003eMaterials in contact: \u003cstrong\u003eNylon\u003c\/strong\u003e (body), \u003cstrong\u003eEPDM\u003c\/strong\u003e (valves), and \u003cstrong\u003eSantoprene\u003c\/strong\u003e (diaphragm).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional integration\u003c\/strong\u003e in R.O. systems: as it does not have a pressure switch, it is controlled by the sensors\/solenoids of the equipment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e against pressure spikes through bypass, reducing risks for membranes and filter housings.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContinuous operation\u003c\/strong\u003e within the thermal curve, ideal for long water production cycles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh chemical compatibility\u003c\/strong\u003e with treated water and typical filtration components.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy maintenance\u003c\/strong\u003e with availability of kits and spare parts from the 8005 series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eMainly as a \u003cstrong\u003ereverse osmosis booster pump\u003c\/strong\u003e (domestic, marine, laboratory, vending) and as a pressure boosting pump in \u003cstrong\u003efiltration\u003c\/strong\u003e or instrumentation where control is managed by the system's electronics\/pressure switches. Also useful in small \u003cem\u003eoff-grid\u003c\/em\u003e processes at 24\/36 V that require stable pressure with a very limited flow rate.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eShurflo 8005-952-480\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e24\/36 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e1.37 l\/min (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePressure\u003c\/td\u003e\n\u003ctd\u003eUp to 90 PSI · \u003cstrong\u003eBypass 80–110 PSI (max.)\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePressure switch\u003c\/td\u003e\n\u003ctd\u003eNot included (external control)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e3-chamber diaphragm, positive displacement\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePorts\u003c\/td\u003e\n\u003ctd\u003e3\/8\"-18 NPT female\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials in contact\u003c\/td\u003e\n\u003ctd\u003eNylon (body), EPDM (valves), Santoprene (diaphragm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDuty cycle\u003c\/td\u003e\n\u003ctd\u003eContinuous (depending on ambient temperature)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLiquid temperature\u003c\/td\u003e\n\u003ctd\u003eup to 82 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eApprox. weight\u003c\/td\u003e\n\u003ctd\u003e≈ 2.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eNSF (drinking water)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRecommended with a suitable \u003cstrong\u003epre-filter\u003c\/strong\u003e, \u003cstrong\u003elow\/high pressure valve\u003c\/strong\u003e, \u003cstrong\u003einlet solenoid valve\u003c\/strong\u003e, and R.O. unit control. If used outside of R.O., install external pressure switches\/relays and a \u003cstrong\u003echeck valve\u003c\/strong\u003e as per the diagram. Check fluid compatibility with EPDM\/Santoprene.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eShurflo Pressure Pump 24\/36V 1.37 l\/min 90 PSI 8005-952-480\u003c\/strong\u003e offers clean integration, bypass protection, and reliability in continuous operation, making it the ideal option for \u003cem\u003eboosters\u003c\/em\u003e in reverse osmosis and demanding filtration.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":51503176221013,"sku":"SHURBOM016","price":159.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/SHURFLO-8005-952-480.png?v=1762627380"},{"product_id":"bomba-shurflo-2088-474-144-50psi","title":"Shurflo Pressure Pump 24V 11.3 l\/min 50 PSI 2088-474-144","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eShurflo Pressure Pump 24V 11.3 l\/min 50 PSI 2088-474-144\u003c\/strong\u003e is a 3-chamber diaphragm pump designed for water transfer and pressure in industrial environments and autonomous 24 V systems. It combines an adjustable pressure switch (30–50 PSI, factory set ~45 PSI) with a self-priming design and durable materials, resulting in reliable operation, low maintenance, and long service life. Its compact construction allows for easy integration into machinery, mobile tanks, or technical cabinets with adequate ventilation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNominal voltage: \u003cstrong\u003e24 VDC\u003c\/strong\u003e with thermally protected permanent magnet motor.\u003c\/li\u003e\n  \u003cli\u003eControl pressure: \u003cstrong\u003eadjustable pressure switch 30–50 PSI\u003c\/strong\u003e (factory cut-off ~45 PSI; reset ~25 ± 5 PSI).\u003c\/li\u003e\n  \u003cli\u003eFlow rate: \u003cstrong\u003e11.3 l\/min\u003c\/strong\u003e (3.0 GPM) at open discharge; stable flow at medium pressures.\u003c\/li\u003e\n  \u003cli\u003eSelf-priming: up to \u003cstrong\u003e3 m\u003c\/strong\u003e (≈10 ft) vertical; max. inlet pressure 2.1 bar (30 PSI).\u003c\/li\u003e\n  \u003cli\u003eConnections: \u003cstrong\u003e1\/2\"-14 parallel male thread\u003c\/strong\u003e for Shurflo swivel fittings.\u003c\/li\u003e\n  \u003cli\u003eWetted materials: \u003cstrong\u003epolypropylene\u003c\/strong\u003e, diaphragm and valves \u003cstrong\u003eSantoprene\u003c\/strong\u003e; 1-way check valve.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOn-demand operation\u003c\/strong\u003e: starts and stops automatically while maintaining stable pressure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy and versatile installation\u003c\/strong\u003e thanks to its 1\/2\" ports and base with vibration dampers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow maintenance\u003c\/strong\u003e with widely available service kits and spare parts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafety\u003c\/strong\u003e: motor with thermal protector; suitable for use with water and compatible liquids.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact and efficient\u003c\/strong\u003e: ideal for confined spaces in vehicles, machines, and mobile tanks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eTransfer and pressurization of \u003cstrong\u003ewater\u003c\/strong\u003e in light industrial processes, mobile tanks, and \u003cstrong\u003eoff-grid 24V\u003c\/strong\u003e equipment; supply for parts washers, rinse lines, irrigation circuits, or technical cleaning where moderate pressure with controlled flow is required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eShurflo 2088-474-144\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e11.3 l\/min (0 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePressure (pressure switch)\u003c\/td\u003e\n\u003ctd\u003eAdjustable 30–50 PSI · Factory cut-off ~45 PSI · Reset ~25 ± 5 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePump type\u003c\/td\u003e\n\u003ctd\u003e3-chamber diaphragm, positive displacement\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSelf-priming\u003c\/td\u003e\n\u003ctd\u003eup to 3 m (≈10 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax. inlet pressure\u003c\/td\u003e\n\u003ctd\u003e2.1 bar (30 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLiquid temperature\u003c\/td\u003e\n\u003ctd\u003emax. 54 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e1\/2\"-14 parallel male thread\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWetted materials\u003c\/td\u003e\n\u003ctd\u003ePP; diaphragm and valves Santoprene\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCheck valve\u003c\/td\u003e\n\u003ctd\u003eIntegrated (1-way)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDuty cycle\u003c\/td\u003e\n\u003ctd\u003eIntermittent (depending on ambient temperature)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\/weight\u003c\/td\u003e\n\u003ctd\u003e≈ 218 × 127 × 112 mm · ≈ 2.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTypical consumption\u003c\/td\u003e\n\u003ctd\u003e≈ 2–5 A depending on pressure\/flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eIt is recommended to install a \u003cstrong\u003e50-mesh filter\/strainer\u003c\/strong\u003e on the suction side, \u003cstrong\u003eShurflo 1\/2\" swivel fittings\u003c\/strong\u003e, and, to reduce cycling in low-flow lines, an \u003cstrong\u003eaccumulator\u003c\/strong\u003e. Check fluid compatibility with Santoprene\/PP before use.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eShurflo Pressure Pump 24V 11.3 l\/min 50 PSI 2088-474-144\u003c\/strong\u003e provides on-demand control, self-priming, and durable materials, making it a reliable solution for transfer and pressure in 24 V industrial and autonomous systems.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":51503176319317,"sku":"SHURBOM012","price":129.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/SHURFLO-2088-474-144.png?v=1762627384"},{"product_id":"bomba-shurflo-2088-573-534-50psi","title":"Shurflo Pressure Pump 24V 13.6 l\/min 50 PSI 2088-573-534","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eShurflo Pressure Pump 24V 13.6 l\/min 50 PSI 2088-573-534\u003c\/strong\u003e is a reinforced version of the 2088 series for industrial applications and autonomous systems that require higher flow with automatic control. It features an adjustable \u003cem\u003esplash-proof\u003c\/em\u003e pressure switch (30–50 PSI, factory set ~45 PSI), high self-priming capability, and a plastic motor coating to improve corrosion resistance. It is designed for \u003cstrong\u003econtinuous service\u003c\/strong\u003e within thermal limits, maintaining a more uniform and quieter flow than other pumps in its power range.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating voltage: \u003cstrong\u003e24 VDC\u003c\/strong\u003e with permanent magnet motor and thermal protection.\u003c\/li\u003e\n  \u003cli\u003eControl pressure: \u003cstrong\u003e30–50 PSI\u003c\/strong\u003e pressure switch (factory cut-off ~45 PSI; reset ~25 PSI).\u003c\/li\u003e\n  \u003cli\u003eFlow rate: \u003cstrong\u003e13.6 l\/min\u003c\/strong\u003e (3.6 GPM) open flow; excellent performance at 30–50 PSI.\u003c\/li\u003e\n  \u003cli\u003eSelf-priming: up to \u003cstrong\u003e2.7 m\u003c\/strong\u003e (≈9 ft) vertical; max. inlet 2.1 bar (30 PSI).\u003c\/li\u003e\n  \u003cli\u003eConnections: \u003cstrong\u003e1\/2\"-14 parallel\u003c\/strong\u003e male thread; easy integration with Shurflo fittings.\u003c\/li\u003e\n  \u003cli\u003eWetted materials: \u003cstrong\u003epolypropylene\u003c\/strong\u003e, diaphragm and valves \u003cstrong\u003eSantoprene\u003c\/strong\u003e; stainless steel fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContinuous use\u003c\/strong\u003e under specified thermal conditions, ideal for processes and prolonged service.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStable on-demand control\u003c\/strong\u003e with a splash-proof protected pressure switch.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigher useful flow\u003c\/strong\u003e to supply multiple points, rinsing, or cleaning circuits.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStrength and durability\u003c\/strong\u003e due to its anti-corrosion coating and technical materials.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSimple maintenance\u003c\/strong\u003e with available 2088 series kits and spare parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eTransfer and \u003cstrong\u003eindustrial pressurization\u003c\/strong\u003e of water, cleaning circuits, rinsing, small process lines, as well as in \u003cstrong\u003eoff-grid 24V systems\u003c\/strong\u003e, mobile tanks, and machinery requiring high flow with controlled pressure.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eShurflo 2088-573-534\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e13.6 l\/min (0 PSI) · ≈ 12.0 l\/min (10 PSI) · ≈ 9.9 l\/min (30 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePressure (pressure switch)\u003c\/td\u003e\n\u003ctd\u003eAdjustable 30–50 PSI · Factory cut-off ~45 PSI · Reset ~25 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePump type\u003c\/td\u003e\n\u003ctd\u003e3-chamber diaphragm, positive displacement\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSelf-priming\u003c\/td\u003e\n\u003ctd\u003eup to 2.7 m (≈9 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax. inlet pressure\u003c\/td\u003e\n\u003ctd\u003e2.1 bar (30 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLiquid temperature\u003c\/td\u003e\n\u003ctd\u003emax. 54 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e1\/2\"-14 parallel male thread\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWetted materials\u003c\/td\u003e\n\u003ctd\u003ePP; diaphragm and valves Santoprene; stainless steel fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePlastic anti-corrosion motor coating\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDuty cycle\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eContinuous\u003c\/strong\u003e (according to thermal curve)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 2.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTypical consumption\u003c\/td\u003e\n\u003ctd\u003e≈ 3–5 A depending on pressure\/flow\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eUL Marine \/ NSF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eUse a \u003cstrong\u003e50-mesh filter\/strainer\u003c\/strong\u003e on suction, \u003cstrong\u003e1\/2\"\u003c\/strong\u003e Shurflo fittings, and, if cycle smoothing is desired, an \u003cstrong\u003eaccumulator\u003c\/strong\u003e. Check the chemical compatibility of the fluid with Santoprene\/PP.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eShurflo Pressure Pump 24V 13.6 l\/min 50 PSI 2088-573-534\u003c\/strong\u003e offers high flow, automatic control, and continuous service, making it the professional choice for industrial pumping and 24 V systems that demand reliability and performance.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":51503176483157,"sku":"SHURBOM013","price":232.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/SHURFLO-2088-573-534.png?v=1762627387"},{"product_id":"bomba-shurflo-5050-2301-g011-60psi","title":"Shurflo Pressure Pump 24V 18.9 l\/min 60 PSI 5050-2301-G011","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eShurflo Pressure Pump 24V 18.9 l\/min 60 PSI 5050-2301-G011\u003c\/strong\u003e is designed for installations with multiple water points (multi-fixture) that require high flow, stable pressure, and great reliability. Its \u003cstrong\u003e4-chamber\u003c\/strong\u003e architecture reduces pulsations compared to 3-chamber pumps, providing more comfortable showers and a uniform supply to faucets and appliances. It includes a cut-off pressure switch and \u003cstrong\u003eadjustable bypass\u003c\/strong\u003e to stabilize pressure when consumption is partially closed. It is self-priming, can \u003cstrong\u003erun dry\u003c\/strong\u003e without damage, and its sealed motor with thermal protection and CE compliance ensures robust service in caravans, boats, cabins, and 24 V off-grid systems.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003e4-chamber\u003c\/strong\u003e design with co-molded diaphragm for smooth and quiet flow.\u003c\/li\u003e\n  \u003cli\u003eIntegrated control: cut-off at \u003cstrong\u003e55 PSI\u003c\/strong\u003e, reset at 40 PSI, and \u003cstrong\u003ebypass at 65 PSI\u003c\/strong\u003e (adjustable).\u003c\/li\u003e\n  \u003cli\u003eSelf-priming up to \u003cstrong\u003e1.82 m\u003c\/strong\u003e and \u003cstrong\u003edry running\u003c\/strong\u003e without damage for increased safety.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e1\/2\"-14 NPSM\u003c\/strong\u003e male ports, compatible with standard fittings.\u003c\/li\u003e\n  \u003cli\u003eMaterials suitable for drinking water: PP body, EPDM valves, and Santoprene diaphragm.\u003c\/li\u003e\n  \u003cli\u003e24 V motor with \u003cstrong\u003ethermal protection\u003c\/strong\u003e and automatic restart; typical consumption 2–6 A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComfort\u003c\/strong\u003e during simultaneous use: supplies several points with less pulsation and better stability.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafety and durability\u003c\/strong\u003e: dry running, thermal protection, and robust components.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTime saving\u003c\/strong\u003e: easy installation with 1\/2\" ports and cushioned base.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVersatility\u003c\/strong\u003e: suitable for drinking water in RV, marine, cabins, or light processes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy maintenance\u003c\/strong\u003e: availability of kits and spare parts from the 5000 series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for \u003cstrong\u003emotorhomes\u003c\/strong\u003e and \u003cstrong\u003eboats\u003c\/strong\u003e with several faucets and a shower, \u003cstrong\u003etiny houses\u003c\/strong\u003e and \u003cem\u003eoff-grid\u003c\/em\u003e cabins, as well as for \u003cstrong\u003ewater transfer and pressurization\u003c\/strong\u003e in light processes where high flow and reliable pressure control at 24 V are required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e5050-2301-G011 (5000 Series)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e18.9 l\/min (0 PSI) · 11.3 l\/min (30 PSI) · 3.9 l\/min (50 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePressure (control)\u003c\/td\u003e\n\u003ctd\u003eCut-off 55 PSI · Reset 40 PSI · \u003cstrong\u003eBypass 65 PSI\u003c\/strong\u003e (adjustable)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSelf-priming\u003c\/td\u003e\n\u003ctd\u003eup to 1.82 m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDry running\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e1\/2\"-14 NPSM male\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLiquid temperature\u003c\/td\u003e\n\u003ctd\u003emax. 54 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials in contact\u003c\/td\u003e\n\u003ctd\u003ePP (body), EPDM (valves), Santoprene (diaphragm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProtections\u003c\/td\u003e\n\u003ctd\u003eSealed motor with thermal protection\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTypical consumption\u003c\/td\u003e\n\u003ctd\u003e≈ 2.0–6.0 A depending on pressure\/flow\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 3.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eCE · Ignition protection 8846\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eIt is recommended to install a \u003cstrong\u003e50-mesh filter\/strainer\u003c\/strong\u003e on the suction side and a \u003cstrong\u003eShurflo accumulator\u003c\/strong\u003e to reduce cycling in networks with small consumptions. Compatible with 1\/2\" NPSM fittings, 1\/2\" hose\/pipe, and drinking water accessories.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eShurflo Pressure Pump 24V 18.9 l\/min 60 PSI 5050-2301-G011\u003c\/strong\u003e combines high flow, automatic control, and robustness, offering a professional solution for supplying water with comfort and reliability in demanding 24 V systems.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":51503176581461,"sku":"SHURBOM014","price":259.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/SHURFLO-5050-2301_ac2de0f9-5d82-4d08-a63a-01813c2d218d.png?v=1762627392"},{"product_id":"bomba-shurflo-8005-991-837-80psi","title":"Shurflo Pressure Pump 24V 2.1 l\/min 80 PSI 8005-991-837","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eShurflo Pressure Pump 24V 2.1 l\/min 80 PSI 8005-991-837\u003c\/strong\u003e is a 3-chamber diaphragm pump specially designed to operate as a \u003cstrong\u003ereverse osmosis booster\u003c\/strong\u003e and filtration systems at 24 V. Unlike the model without a pressure switch, it integrates an \u003cstrong\u003eadjustable pressure switch 60–80 PSI\u003c\/strong\u003e (factory setting: cuts off at 80 PSI and resets at 60 ± 5 PSI), allowing \u003cstrong\u003eon-demand operation\u003c\/strong\u003e without the need for external control. Its \u003cstrong\u003eself-priming capability up to 7 ft (≈2.1 m)\u003c\/strong\u003e simplifies installation with a tank below, while the \u003cstrong\u003eone-way check valve\u003c\/strong\u003e prevents backflow and maintains the water column in the line.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNominal voltage \u003cstrong\u003e24 VDC\u003c\/strong\u003e with permanent magnet motor and thermal protection.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated pressure switch\u003c\/strong\u003e: cut-off at 80 PSI, start at 60 PSI (adjustable between 60–80 PSI).\u003c\/li\u003e\n  \u003cli\u003eNominal flow rate \u003cstrong\u003e2.1 l\/min\u003c\/strong\u003e (0.55 GPM) open flow; stable performance at high pressure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSelf-priming 7 ft\u003c\/strong\u003e and maximum inlet pressure 30 PSI.\u003c\/li\u003e\n  \u003cli\u003ePorts \u003cstrong\u003e3\/8\"-18 NPT female\u003c\/strong\u003e compatible with standard fittings.\u003c\/li\u003e\n  \u003cli\u003eMaterials: \u003cstrong\u003eNylon\u003c\/strong\u003e (body), \u003cstrong\u003eEPDM\u003c\/strong\u003e (valves), and \u003cstrong\u003eSantoprene\u003c\/strong\u003e (diaphragm).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\nSimple \u003cstrong\u003eautomation\u003c\/strong\u003e: the pressure switch manages ON\/OFF according to line pressure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure accuracy\u003c\/strong\u003e to maximize R.O. membrane performance and improve produced water quality.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlexible installation\u003c\/strong\u003e thanks to self-priming and 3\/8\" NPT ports.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReliability\u003c\/strong\u003e with integrated check valve and positive displacement design.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e: low consumption (≈ 0.5–1.6 A depending on pressure), ideal for 24 V and \u003cem\u003eoff-grid\u003c\/em\u003e systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eBooster for \u003cstrong\u003edomestic\/boat reverse osmosis\u003c\/strong\u003e, \u003cstrong\u003eprecision filtration\u003c\/strong\u003e, laboratories, vending, and any system requiring controlled pressurization with limited flow. Also useful as a booster pump in instrumentation circuits and small water processes.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eShurflo 8005-991-837\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e2.1 l\/min (0 PSI) · 1.9 l\/min (20 PSI) · 1.2 l\/min (80 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePressure switch\u003c\/td\u003e\n\u003ctd\u003eAdjustable 60–80 PSI · Factory: cut-off 80 \/ start 60 ± 5 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e3-chamber diaphragm, positive displacement\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSelf-priming\u003c\/td\u003e\n\u003ctd\u003eup to 7 ft (≈ 2.1 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePorts\u003c\/td\u003e\n\u003ctd\u003e3\/8\"-18 NPT female\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCheck-valve\u003c\/td\u003e\n\u003ctd\u003eOne-way (prevents reverse flow)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLiquid temperature\u003c\/td\u003e\n\u003ctd\u003eup to 82 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDuty cycle\u003c\/td\u003e\n\u003ctd\u003eIntermittent (according to thermal curve)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 1.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eNSF (drinking water)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eIt is recommended to install a suitable \u003cstrong\u003epre-filter\u003c\/strong\u003e, \u003cstrong\u003eshut-off\/solenoid valve\u003c\/strong\u003e, and, if applicable, a \u003cstrong\u003epressurized tank\u003c\/strong\u003e. For integration in R.O., respect the pressure range recommended by the membrane manufacturer. Always check fluid compatibility with EPDM\/Santoprene.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eShurflo Pressure Pump 24V 2.1 l\/min 80 PSI 8005-991-837\u003c\/strong\u003e combines automatic control, self-priming, and energy efficiency in a compact format: the perfect \u003cem\u003ebooster\u003c\/em\u003e for reverse osmosis and professional filtration at 24 V.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":51503176712533,"sku":"SHURBOM017","price":134.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/SHURFLO-8005-991-837.png?v=1762627394"},{"product_id":"bomba-shurflo-8000-953-238-100psi","title":"Shurflo Pressure Pump 24V 6.1 l\/min 100 PSI 8000-953-238","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eShurflo Pressure Pump 24V 6.1 l\/min 100 PSI 8000-953-238\u003c\/strong\u003e is a 3-chamber diaphragm pump designed for \u003cstrong\u003eindustrial spraying\u003c\/strong\u003e and technical applications that require high pressure and controlled flow. It integrates an \u003cstrong\u003eadjustable pressure switch 80–100 PSI\u003c\/strong\u003e (factory set at 100 PSI with reset at 85 ± 5 PSI), providing a uniform and repeatable mist pattern in precision nozzles. Its high self-priming capacity (up to 3 m) and the \u003cstrong\u003etwo-way check valve\u003c\/strong\u003e that prevents backflow and allows a 6 ft forward column, simplify installation in mobile equipment. With robust materials (nylon, EPDM, and Santoprene) and a permanent magnet motor, it offers reliability and stability in demanding intermittent service.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable working pressure up to \u003cstrong\u003e100 PSI\u003c\/strong\u003e for fine mist and precise treatments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVertical self-priming\u003c\/strong\u003e up to 3 m; max. inlet pressure 2.1 bar.\u003c\/li\u003e\n  \u003cli\u003eTypical flow: 6.1 l\/min open and \u003cstrong\u003e4.0 l\/min at 100 PSI\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e3\/8\"-18 NPT female ports\u003c\/strong\u003e for direct integration with spray fittings and hoses.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-way check valve\u003c\/strong\u003e that prevents reverse flow and maintains the fluid column.\u003c\/li\u003e\n  \u003cli\u003eContact materials: nylon housing, \u003cstrong\u003eEPDM\u003c\/strong\u003e valves, and \u003cstrong\u003eSantoprene\u003c\/strong\u003e diaphragm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision and control\u003c\/strong\u003e of the spray pattern thanks to constant and stable pressure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlexible installation\u003c\/strong\u003e: powerful self-priming and standard NPT ports in a compact format.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReliability\u003c\/strong\u003e with 2-way check valve and positive displacement design.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh chemical compatibility\u003c\/strong\u003e (EPDM\/Santoprene) for numerous agrochemicals and cleaning agents.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e: low consumption (≈ 1.6–4.7 A) for 24 V mobile or off-grid systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eindustrial spraying\u003c\/strong\u003e, micro-misting, and \u003cstrong\u003etechnical cleaning\u003c\/strong\u003e, as well as for \u003cstrong\u003edust control\u003c\/strong\u003e, spot treatments, and portable precision equipment at 24 V. Its combination of high pressure and moderate flow is ideal when uniformity and fluid savings are prioritized.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e8000-953-238\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e6.1 l\/min (0 PSI) · 5.3 l\/min (30 PSI) · 4.0 l\/min (100 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePressure switch\u003c\/td\u003e\n\u003ctd\u003eAdjustable 80–100 PSI · Factory 100 PSI (reset 85 ± 5 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePump type\u003c\/td\u003e\n\u003ctd\u003e3-chamber diaphragm, positive displacement\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSelf-priming\u003c\/td\u003e\n\u003ctd\u003eup to 3 m (10 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCheck valve\u003c\/td\u003e\n\u003ctd\u003e2-way; prevents backflow and allows 6 ft forward column\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e3\/8\"-18 NPT female\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLiquid temperature\u003c\/td\u003e\n\u003ctd\u003emax. 82 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eContact materials\u003c\/td\u003e\n\u003ctd\u003eNylon (body), EPDM (valves), Santoprene (diaphragm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDuty cycle\u003c\/td\u003e\n\u003ctd\u003eIntermittent (according to thermal curve)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTypical consumption\u003c\/td\u003e\n\u003ctd\u003e≈ 1.6–4.7 A depending on pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 2.13 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e50-mesh filter\/strainer\u003c\/strong\u003e is recommended on suction, 3\/8\" NPT fittings, and, if you wish to smooth pulsations with fine nozzles, a \u003cstrong\u003eShurflo accumulator\u003c\/strong\u003e. Always check the fluid compatibility with EPDM\/Santoprene.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eShurflo Pressure Pump 24V 6.1 l\/min 100 PSI 8000-953-238\u003c\/strong\u003e provides the high pressure and precision required for industrial spraying tasks, with the reliability and support of the 8000 series.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":51503176876373,"sku":"SHURBOM015","price":133.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/SHURFLO-8000-953-238.png?v=1762627398"}],"url":"https:\/\/aurensol.com\/en\/collections\/bombas-de-presion-24v.oembed","provider":"Aurensol","version":"1.0","type":"link"}