{"title":"Structures for Ground and Flat Roof","description":"\u003ch2\u003eWhat are structures for ground and flat roof?\u003c\/h2\u003e\n\u003cp\u003eThey are support systems that allow the installation of photovoltaic modules on horizontal surfaces (flat roofs and ground), providing controlled tilt, stability against wind\/snow, and load evacuation paths without compromising waterproofing. Within the family of \u003ca href=\"\/en\/collections\/estructuras-paneles-solares\"\u003estructures for solar panels\u003c\/a\u003e, these solutions are based on benches with triangles, aerodynamic bases and\/or distributed ballasts, and are complemented by specific \u003ca href=\"\/en\/collections\/accesorios-estructuras\"\u003eaccessories\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eAdvantages and limitations\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum performance\u003c\/strong\u003e: allows adjustment of the angle (e.g., 10–30º) to optimize annual production.\u003c\/li\u003e\n  \u003cli\u003eInstallation without drilling (depending on the system): option with ballast to preserve the \u003cstrong\u003ewatertightness\u003c\/strong\u003e of the roof.\u003c\/li\u003e\n  \u003cli\u003eSpeed and repeatability: modular kits in aluminium with predefined joints.\u003c\/li\u003e\n  \u003cli\u003eVersatility: south orientation or East\/West configuration to reduce height and wind loads.\u003c\/li\u003e\n  \u003cli\u003eLimitations: the weight of the ballast and the distances to the edge must be calculated; on lightweight roofs, mechanical fixing or reinforcements may be required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eResidential and tertiary buildings with flat roofs of concrete, gravel, or membrane.\u003c\/li\u003e\n  \u003cli\u003eIndustrial and commercial: large surfaces with East\/West layout for better power density.\u003c\/li\u003e\n  \u003cli\u003eGround mounting: driven or ballasted benches for self-consumption, pumping, or small-scale plants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to choose the right solution\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupport and admissible load\u003c\/strong\u003e: check the structural capacity of the roof and the additional weight per m² (ballast + structure).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFixing strategy\u003c\/strong\u003e: ballast only (without drilling), mixed (ballast + anchors), or mechanical fixing with certified pipe penetrations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAngle and orientation\u003c\/strong\u003e: south for annual peak, or East\/West for more useful hours and lower row height.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWind zoning\u003c\/strong\u003e: perimeters and corners require greater fixing\/ballast; respect setbacks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModule compatibility\u003c\/strong\u003e: frame height, distance between supports, and manufacturer’s clamps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eStructural aluminium and A2\/A4 stainless steel fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSolutions\u003c\/td\u003e\n\u003ctd\u003eInclined triangles, aerodynamic bases, benches for East\/West, driven\/ballasted on ground\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTilt range\u003c\/td\u003e\n\u003ctd\u003eApproximately 5º–35º depending on model and load calculation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing to support\u003c\/td\u003e\n\u003ctd\u003eDistributed ballast, mechanical fixing with pipe penetrations or mixed, depending on waterproofing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFrame compatibility\u003c\/td\u003e\n\u003ctd\u003eIntermediate\/end clamps for standard frames (≈30–40 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCalculation standards\u003c\/td\u003e\n\u003ctd\u003eWind\/snow Eurocodes and manufacturer’s technical guides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eBest practices\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCarry out a \u003cstrong\u003eload calculation\u003c\/strong\u003e considering wind zone, building height, and obstacles.\u003c\/li\u003e\n  \u003cli\u003eProtect the membrane with rubber bases or separating sheets; avoid puncturing.\u003c\/li\u003e\n  \u003cli\u003eDefine setbacks to the edge and maintenance paths; align rows to limit \u003cem\u003eshading\u003c\/em\u003e.\u003c\/li\u003e\n  \u003cli\u003eIn East\/West, control the spacing between rows and the height to reduce wind suction.\u003c\/li\u003e\n  \u003cli\u003eRoute cabling through trays and secure it with UV ties; use certified pipe penetrations if there are penetrations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eComparisons\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGround\/Flat\u003c\/strong\u003e vs \u003ca href=\"\/en\/collections\/estructuras-coplanares\"\u003e\u003cstrong\u003eCoplanar\u003c\/strong\u003e\u003c\/a\u003e: greater freedom of angle and irradiation, in exchange for greater wind exposure and need for ballast or fixing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGround\/Flat\u003c\/strong\u003e vs \u003ca href=\"\/en\/collections\/estructuras-cubierta-metalica\"\u003e\u003cstrong\u003eMetal roof\u003c\/strong\u003e\u003c\/a\u003e: does not depend on sheet crests\/valleys; prioritizes waterproofing and load distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRelated accessories\u003c\/h3\u003e\n\u003cp\u003eComplete your project with \u003ca href=\"\/en\/collections\/accesorios-estructuras\"\u003eclamps, joints, rails, wind stops, and fasteners\u003c\/a\u003e. For a global overview by type of support, see \u003ca href=\"\/en\/collections\/estructuras-paneles-solares\"\u003eStructures for Solar Panels\u003c\/a\u003e.\u003c\/p\u003e\n","products":[{"product_id":"estructura-aluminio-suelo-plano-1-panel-30grados","title":"Aluminum Structure Flat Ground 1 Panel","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFlat Roof Aluminum Structure 1 Panel\u003c\/strong\u003e is a professional support system for mounting a photovoltaic module on flat roofs and surfaces, made of anodized aluminum with stainless steel fasteners. Its design prioritizes quick assembly, corrosion resistance, and structural safety, offering a \u003cstrong\u003efixed tilt of 15º\/20º\/30º\u003c\/strong\u003e that optimizes the solar incidence angle and improves annual production without complicating installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal compatibility with 30–35 mm frame modules (portrait or landscape orientation).\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum profiles with 47×37 mm rail type and channel for M8 hammer screw.\u003c\/li\u003e\n\u003cli\u003eAvailable angles: 15º, 20º, or 30º to adapt performance to site latitude and shading.\u003c\/li\u003e\n\u003cli\u003eAnchoring to the support using M10 bolts (chemical or expansion) with robust fixing plates.\u003c\/li\u003e\n\u003cli\u003eStainless steel A2\/A4 fasteners and equipotential bonding points for safe grounding.\u003c\/li\u003e\n\u003cli\u003eIntegrated cable management in the rail channel for a clean and protected finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eQuick and precise assembly thanks to profiles with guides, universal clamps, and optimized connectors.\u003c\/li\u003e\n\u003cli\u003eHigher energy yield by ensuring the optimal working angle throughout the year.\u003c\/li\u003e\n\u003cli\u003eSuperior durability in marine and industrial environments due to aluminum anodizing and use of stainless steel.\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance: visual inspection, torque check, and periodic cleaning.\u003c\/li\u003e\n\u003cli\u003eOrientation flexibility (portrait\/landscape) to adapt to module dimensions and available space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eDesigned for installations on walkable flat roofs, technical rooftops, and concrete slabs in residential, commercial, \u003cem\u003eand\u003c\/em\u003e industrial projects. It is ideal for self-consumption, small-scale plants, technical cabins, and modular expansions where reliability, clean aesthetics, and ease of assembly are required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003eFixed 15º \/ 20º \/ 30º (depending on leg set)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum profiles; stainless steel A2\/A4 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchoring to support\u003c\/td\u003e\n\u003ctd\u003eM10 bolts (chemical or expansion) on slab\/flat roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule orientation\u003c\/td\u003e\n\u003ctd\u003ePortrait or landscape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail\u003c\/td\u003e\n\u003ctd\u003e47×37 mm profile type with channel for M8 and cable management\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaintenance\u003c\/td\u003e\n\u003ctd\u003eAnnual retightening and inspection of anchoring points and seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with universal end and mid clamps 30\/35 mm, rail connectors, grounding clips\/kits, UV cable glands, and EPDM protectors under the rail. It is recommended to maintain row spacing according to the \u003cem\u003etilt\u003c\/em\u003e and the height of the module's upper edge to avoid shading. For frames outside 30–35 mm, use specific clamps.\u003c\/p\u003e\n\u003cp\u003eWith the \u003cstrong\u003eFlat Roof Aluminum Structure 1 Panel\u003c\/strong\u003e you will achieve a clean, safe, and durable installation that maximizes available space, improves photovoltaic system efficiency, and facilitates preventive maintenance throughout the entire service life of the installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502762492245,"sku":"ELEKEST035","price":91.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SUELO-1.png?v=1762625707"},{"product_id":"estructura-aluminio-suelo-plano-10-paneles-inclinacion","title":"Aluminum Structure Flat Ground 10 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFlat Roof Aluminum Structure for 10 Panels\u003c\/strong\u003e is designed to mount a continuous row of ten photovoltaic modules on flat surfaces with total safety and efficiency. Its construction in anodized aluminum and stainless steel fasteners offers high resistance to corrosion, quick assembly, and structural stability, while the \u003cstrong\u003e15º\/20º\/30º tilt\u003c\/strong\u003e optimizes the solar angle and reduces shading between rows.\u003c\/p\u003e\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 10 modules with 30–35 mm frame (landscape recommended; portrait supported).\u003c\/li\u003e\n\u003cli\u003eProfiles with 47×37 mm rail type and channel for M8 hammer screw.\u003c\/li\u003e\n\u003cli\u003eAvailable angles: 15º, 20º, or 30º using a set of interchangeable legs.\u003c\/li\u003e\n\u003cli\u003eAnchoring to support with M10 bolts (chemical or expansion) on slab\/flat roof.\u003c\/li\u003e\n\u003cli\u003eStainless steel fasteners A2\/A4; equipotential bonding points for grounding.\u003c\/li\u003e\n\u003cli\u003eDistributed rail connectors for structural continuity and even load distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast and precise assembly thanks to continuous rails, optimized connectors, and universal clamps.\u003c\/li\u003e\n\u003cli\u003eSuperior performance by ensuring the optimal working angle throughout the year.\u003c\/li\u003e\n\u003cli\u003eHigh rigidity against wind and snow due to continuous profile and dimensioned supports.\u003c\/li\u003e\n\u003cli\u003eHigh durability in marine and industrial environments (anodized aluminum + stainless steel).\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance: visual inspection and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\u003cp\u003eSuitable for residential, commercial, \u003cem\u003eand\u003c\/em\u003e industrial installations on technical rooftops, walkable flat roofs, and concrete slabs. Suitable for self-consumption and modular solar fields that require reliability, standardization, and ease of maintenance.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003eFixed 15º \/ 20º \/ 30º\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum profiles; stainless steel fasteners A2\/A4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchoring to support\u003c\/td\u003e\n\u003ctd\u003eM10 bolts (chemical or expansion) on slab\/flat roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule orientation\u003c\/td\u003e\n\u003ctd\u003eLandscape recommended; portrait compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail\u003c\/td\u003e\n\u003ctd\u003e47×37 mm profile with channel for M8 and cable routing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibilities\u003c\/h3\u003e\u003cp\u003eCompatible with end and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, UV cable glands, EPDM protectors under rail, and cable trays\/baskets for long runs. Maintain the separation between rows according to the \u003cem\u003etilt\u003c\/em\u003e and the height of the upper edge of the module to avoid shading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlat Roof Aluminum Structure for 10 Panels\u003c\/strong\u003e ensures a clean and professional installation, optimizes the available space, and improves the overall efficiency of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502762688853,"sku":"ELEKEST044","price":379.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SUELO-1_b566f12d-6052-4b8a-ac8a-4a06e63d184b.png?v=1762625708"},{"product_id":"estructura-aluminio-suelo-plano-2-paneles","title":"Aluminum Structure Flat Ground 2 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFlat Roof Aluminum Structure for 2 Panels\u003c\/strong\u003e allows the installation of a row of two photovoltaic modules on flat surfaces with maximum safety. Manufactured from anodized aluminum and stainless steel fasteners, it is designed for quick, stable, and durable assembly, offering a \u003cstrong\u003etilt of 15º\/20º\/30º\u003c\/strong\u003e to optimize solar capture and minimize shading between rows.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCapacity: 2 modules with 30–35 mm frame (landscape recommended; portrait supported).\u003c\/li\u003e\n\u003cli\u003eAluminum profiles with 47×37 mm rail type and channel for M8 hammer screw.\u003c\/li\u003e\n\u003cli\u003eAvailable angles: 15º, 20º, or 30º depending on leg set.\u003c\/li\u003e\n\u003cli\u003eAnchoring to support using M10 bolts (chemical or expansion) on slab\/flat roof.\u003c\/li\u003e\n\u003cli\u003eStainless steel A2\/A4 fasteners and equipotential bonding points for grounding.\u003c\/li\u003e\n\u003cli\u003eRail connectors for structural continuity and even load distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eQuick assembly: fewer joints thanks to continuous rails and universal clamps.\u003c\/li\u003e\n\u003cli\u003eSuperior performance: the fixed tilt positions the module at the optimal annual angle.\u003c\/li\u003e\n\u003cli\u003eRobustness against wind and snow due to the continuous profile and dimensioned support.\u003c\/li\u003e\n\u003cli\u003eHigh durability in marine and industrial environments (anodized aluminum + stainless steel).\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance: visual inspection and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for residential, commercial, and industrial installations on technical rooftops, walkable flat roofs, and concrete slabs. Appropriate for self-consumption and small modular solar fields where a reliable and standardized solution is required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003eFixed 15º \/ 20º \/ 30º\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum profiles; stainless steel A2\/A4 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchoring to support\u003c\/td\u003e\n\u003ctd\u003eM10 bolts (chemical or expansion) on slab\/flat roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule orientation\u003c\/td\u003e\n\u003ctd\u003eLandscape recommended; portrait compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail\u003c\/td\u003e\n\u003ctd\u003e47×37 mm profile with channel for M8 and cable routing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with 30\/35 mm end and mid clamps, rail connectors, clips\/grounding kit, UV cable glands, and EPDM protectors under the rail. Maintain row spacing according to \u003cem\u003etilt\u003c\/em\u003e and the height of the upper edge of the module to avoid shading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlat Roof Aluminum Structure for 2 Panels\u003c\/strong\u003e offers a clean and professional installation, optimizes available space, and improves the overall efficiency of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502762787157,"sku":"ELEKEST036","price":101.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SUELO-1_984dc032-6e4b-4a5c-82fe-492c6ab020d0.png?v=1762625711"},{"product_id":"estructura-aluminio-suelo-plano-3-paneles","title":"Aluminum Structure Flat Ground 3 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFlat Roof Aluminum Structure for 3 Panels\u003c\/strong\u003e is designed to mount a continuous row of three photovoltaic modules on flat surfaces with maximum safety. Manufactured from anodized aluminum with stainless steel fasteners, it offers quick and stable assembly, with a \u003cstrong\u003etilt of 15º\/20º\/30º\u003c\/strong\u003e to optimize solar capture and minimize shading between rows.\u003c\/p\u003e\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 3 modules with 30–35 mm frame (landscape recommended; portrait supported).\u003c\/li\u003e\n\u003cli\u003eAluminum profiles with 47×37 mm rail type and channel for M8 hammer screw.\u003c\/li\u003e\n\u003cli\u003eAvailable angles: 15º, 20º, or 30º using leg set.\u003c\/li\u003e\n\u003cli\u003eAnchoring to support using M10 bolts (chemical or expansion) on slab\/flat roof.\u003c\/li\u003e\n\u003cli\u003eStainless steel A2\/A4 fasteners and equipotential bonding points for grounding.\u003c\/li\u003e\n\u003cli\u003eRail connectors for structural continuity and even load distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast assembly thanks to continuous rails, universal clamps, and fewer joints.\u003c\/li\u003e\n\u003cli\u003eSuperior performance by ensuring the correct working angle year-round.\u003c\/li\u003e\n\u003cli\u003eRobustness against wind and snow due to profile continuity and dimensioned support.\u003c\/li\u003e\n\u003cli\u003eHigh durability in marine and industrial environments (anodized aluminum + stainless steel).\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance: visual inspection and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\u003cp\u003eSuitable for residential, commercial, and industrial installations on technical rooftops, walkable flat roofs, and concrete slabs. Appropriate for self-consumption and small modular solar fields requiring reliability and standardization.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003eFixed 15º \/ 20º \/ 30º\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum profiles; stainless steel A2\/A4 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchoring to support\u003c\/td\u003e\n\u003ctd\u003eM10 bolts (chemical or expansion) on slab\/flat roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule orientation\u003c\/td\u003e\n\u003ctd\u003eLandscape recommended; portrait compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail\u003c\/td\u003e\n\u003ctd\u003e47×37 mm profile with channel for M8 and cable routing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibilities\u003c\/h3\u003e\u003cp\u003eCompatible with 30\/35 mm end and mid clamps, rail connectors, clips\/grounding kit, UV cable glands, and EPDM protectors under the rail. Maintain row spacing according to \u003cem\u003etilt\u003c\/em\u003e and the height of the module’s upper edge to avoid shading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlat Roof Aluminum Structure for 3 Panels\u003c\/strong\u003e offers a clean and professional installation, optimizes available space, and improves the overall efficiency of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502763049301,"sku":"ELEKEST037","price":147.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SUELO-1_ff83aa3b-da25-4412-bb80-5861a23a3124.png?v=1762625713"},{"product_id":"estructura-aluminio-suelo-plano-4-paneles-inclinacion","title":"Aluminum Structure Flat Ground 4 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFlat Roof Aluminum Structure for 4 Panels\u003c\/strong\u003e allows the installation of a row of four photovoltaic modules on flat surfaces with maximum safety. Its construction in anodized aluminum and stainless steel fasteners offers high resistance to corrosion, quick assembly, and optimized performance thanks to the \u003cstrong\u003e15º\/20º\/30º tilt\u003c\/strong\u003e that adjusts the angle of solar incidence.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCapacity: 4 modules with 30–35 mm frame (landscape recommended; portrait supported).\u003c\/li\u003e\n\u003cli\u003eProfiles with 47×37 mm rail type and channel for M8 hammer screw.\u003c\/li\u003e\n\u003cli\u003eAvailable angles: 15º, 20º, or 30º depending on the set of legs.\u003c\/li\u003e\n\u003cli\u003eAnchoring to support using M10 bolts (chemical or expansion) on slab\/flat roof.\u003c\/li\u003e\n\u003cli\u003eStainless steel A2\/A4 fasteners and equipotential bonding points for grounding.\u003c\/li\u003e\n\u003cli\u003eRail connectors for structural continuity and uniform load distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFast and precise assembly with fewer joints and universal clamps.\u003c\/li\u003e\n\u003cli\u003eHigher annual production by ensuring the optimal working angle.\u003c\/li\u003e\n\u003cli\u003eHigh rigidity against wind and snow thanks to rail continuity.\u003c\/li\u003e\n\u003cli\u003eSuperior durability in marine and industrial environments.\u003c\/li\u003e\n\u003cli\u003eReduced maintenance: visual inspection and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for residential, commercial, and industrial installations on technical rooftops, walkable flat roofs, and concrete slabs. Appropriate for self-consumption and small modular solar fields requiring reliability and standardization.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003eFixed 15º \/ 20º \/ 30º\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum profiles; stainless steel A2\/A4 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchoring to support\u003c\/td\u003e\n\u003ctd\u003eM10 bolts (chemical or expansion) on slab\/flat roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule orientation\u003c\/td\u003e\n\u003ctd\u003eLandscape recommended; portrait compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail\u003c\/td\u003e\n\u003ctd\u003e47×37 mm profile with channel for M8 and cable routing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with 30\/35 mm end and intermediate clamps, rail connectors, clips\/grounding kit, UV cable glands, and EPDM protectors under the rail. Maintain row spacing according to \u003cem\u003etilt\u003c\/em\u003e and the height of the upper edge of the module to avoid shading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlat Roof Aluminum Structure for 4 Panels\u003c\/strong\u003e ensures a clean and professional installation, optimizes available space, and improves the efficiency of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502763278677,"sku":"ELEKEST038","price":174.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SUELO-1_0684fc2e-a4c5-45a8-ac7e-291812943b3b.png?v=1762625715"},{"product_id":"estructura-aluminio-suelo-plano-5-paneles-30grados","title":"Aluminum Structure Flat Ground 5 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFlat Roof Aluminum Structure for 5 Panels\u003c\/strong\u003e allows the installation of a continuous row of five photovoltaic modules on flat surfaces with maximum safety. Its construction in anodized aluminum and stainless steel fasteners offers corrosion resistance, quick assembly, and optimized performance thanks to the \u003cstrong\u003e15º\/20º\/30º tilt\u003c\/strong\u003e, which improves the angle of solar incidence and reduces shading between rows.\u003c\/p\u003e\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 5 modules with 30–35 mm frame (landscape recommended; portrait supported).\u003c\/li\u003e\n\u003cli\u003eProfiles with 47×37 mm rail type and channel for M8 hammer screw.\u003c\/li\u003e\n\u003cli\u003eAvailable angles: 15º, 20º, or 30º (depending on leg set).\u003c\/li\u003e\n\u003cli\u003eAnchoring to support using M10 bolts (chemical or expansion) on slab\/flat roof.\u003c\/li\u003e\n\u003cli\u003eStainless steel A2\/A4 fasteners and equipotential bonding points for grounding.\u003c\/li\u003e\n\u003cli\u003eRail connectors for structural continuity and even load distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast and precise assembly with fewer joints and universal clamps.\u003c\/li\u003e\n\u003cli\u003eHigher annual yield by ensuring the optimal working angle.\u003c\/li\u003e\n\u003cli\u003eHigh rigidity against wind and snow due to continuous rails and dimensioned supports.\u003c\/li\u003e\n\u003cli\u003eSuperior durability in marine and industrial environments.\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance: visual inspection and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\u003cp\u003eSuitable for residential, commercial \u003cem\u003eand\u003c\/em\u003e industrial installations on technical rooftops, walkable flat roofs, and concrete slabs. Appropriate for self-consumption and modular solar fields where reliability and standardization are required.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003eFixed 15º \/ 20º \/ 30º\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum profiles; stainless steel A2\/A4 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchoring to support\u003c\/td\u003e\n\u003ctd\u003eM10 bolts (chemical or expansion) on slab\/flat roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule orientation\u003c\/td\u003e\n\u003ctd\u003eLandscape recommended; portrait compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail\u003c\/td\u003e\n\u003ctd\u003e47×37 mm profile with channel for M8 and cable routing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibilities\u003c\/h3\u003e\u003cp\u003eCompatible with 30\/35 mm end and mid clamps, rail connectors, clips\/grounding kit, UV cable glands, and EPDM protectors under the rail. Maintain row spacing according to the \u003cem\u003etilt\u003c\/em\u003e and the height of the upper edge of the module to avoid shading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlat Roof Aluminum Structure for 5 Panels\u003c\/strong\u003e ensures a clean and professional installation, optimizes available space, and improves the overall efficiency of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502763508053,"sku":"ELEKEST039","price":213.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SUELO-1_70f41514-0376-4edb-8fcf-552a9e969254.png?v=1762625717"},{"product_id":"estructura-aluminio-suelo-plano-6-paneles-30grados","title":"Aluminum Structure Flat Ground 6 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFlat Roof Aluminum Structure for 6 Panels\u003c\/strong\u003e is designed to mount a continuous row of six photovoltaic modules on flat surfaces with maximum safety. Constructed from anodized aluminum with stainless steel fasteners, it combines quick installation, corrosion resistance, and structural stability, offering \u003cstrong\u003e15º\/20º\/30º tilt\u003c\/strong\u003e to optimize solar capture and reduce shading between rows.\u003c\/p\u003e\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 6 modules with 30–35 mm frame (landscape recommended; portrait supported).\u003c\/li\u003e\n\u003cli\u003eProfiles with 47×37 mm rail type and channel for M8 hammer screw.\u003c\/li\u003e\n\u003cli\u003eAvailable angles: 15º, 20º, or 30º (depending on leg set).\u003c\/li\u003e\n\u003cli\u003eAnchoring to support using M10 bolts (chemical or expansion) on slab\/flat roof.\u003c\/li\u003e\n\u003cli\u003eStainless steel A2\/A4 fasteners and equipotential bonding points for grounding.\u003c\/li\u003e\n\u003cli\u003eRail connectors for structural continuity and even load distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast and precise assembly thanks to continuous rails and universal clamps.\u003c\/li\u003e\n\u003cli\u003eHigher annual yield by ensuring the optimal working angle.\u003c\/li\u003e\n\u003cli\u003eHigh rigidity against wind and snow due to continuous rails and dimensioned supports.\u003c\/li\u003e\n\u003cli\u003eSuperior durability in marine and industrial environments (anodized aluminum + stainless steel).\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance: visual inspection and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\u003cp\u003eSuitable for residential, commercial \u003cem\u003eand\u003c\/em\u003e industrial installations on technical rooftops, walkable flat roofs, and concrete slabs. Appropriate for self-consumption and modular solar fields where reliability, standardization, and fast assembly are required.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003eFixed 15º \/ 20º \/ 30º\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum profiles; stainless steel A2\/A4 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchoring to support\u003c\/td\u003e\n\u003ctd\u003eM10 bolts (chemical or expansion) on slab\/flat roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule orientation\u003c\/td\u003e\n\u003ctd\u003eLandscape recommended; portrait compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail\u003c\/td\u003e\n\u003ctd\u003e47×37 mm profile with channel for M8 and cable routing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibilities\u003c\/h3\u003e\u003cp\u003eCompatible with 30\/35 mm end and mid clamps, rail connectors, clips\/grounding kit, UV cable glands, and EPDM protectors under the rail. Maintain row spacing according to \u003cem\u003etilt\u003c\/em\u003e and the height of the module’s upper edge to avoid shading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlat Roof Aluminum Structure for 6 Panels\u003c\/strong\u003e offers a clean and professional installation, optimizes available space, and improves the overall efficiency of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502763540821,"sku":"ELEKEST040","price":238.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SUELO-1_e284e69a-935d-4ceb-bde2-1826d806a96f.png?v=1762625721"},{"product_id":"estructura-aluminio-suelo-plano-7-paneles","title":"Aluminum Structure Flat Ground 7 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFlat Roof Aluminum Structure for 7 Panels\u003c\/strong\u003e is designed to mount a continuous row of seven photovoltaic modules on flat surfaces with complete safety. Manufactured from anodized aluminum and stainless steel fasteners, it combines quick installation, structural stability, and corrosion resistance, offering \u003cstrong\u003e15º\/20º\/30º tilt\u003c\/strong\u003e to optimize solar capture and minimize shading between rows.\u003c\/p\u003e\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 7 modules with 30–35 mm frame (landscape recommended; portrait supported).\u003c\/li\u003e\n\u003cli\u003eAluminum profiles with 47×37 mm rail type and channel for M8 hammer screw.\u003c\/li\u003e\n\u003cli\u003eAvailable angles: 15º, 20º, or 30º using interchangeable leg sets.\u003c\/li\u003e\n\u003cli\u003eAnchoring to support with M10 bolts (chemical or expansion) on slab\/flat roof.\u003c\/li\u003e\n\u003cli\u003eStainless steel A2\/A4 fasteners and equipotential bonding points for grounding.\u003c\/li\u003e\n\u003cli\u003eRail connectors for structural continuity and even load distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast and precise assembly thanks to continuous rails and universal clamps.\u003c\/li\u003e\n\u003cli\u003eHigher annual yield by ensuring the optimal working angle.\u003c\/li\u003e\n\u003cli\u003eHigh rigidity against wind and snow due to continuous rails and dimensioned supports.\u003c\/li\u003e\n\u003cli\u003eSuperior durability in marine and industrial environments (anodized aluminum + stainless steel).\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance: visual inspection and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\u003cp\u003eSuitable for residential, commercial \u003cem\u003eand\u003c\/em\u003e industrial installations on technical rooftops, walkable flat roofs, and concrete slabs. Appropriate for self-consumption and modular solar fields where reliability and standardization are required.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003eFixed 15º \/ 20º \/ 30º\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum profiles; stainless steel A2\/A4 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchoring to support\u003c\/td\u003e\n\u003ctd\u003eM10 bolts (chemical or expansion) on slab\/flat roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule orientation\u003c\/td\u003e\n\u003ctd\u003eLandscape recommended; portrait compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail\u003c\/td\u003e\n\u003ctd\u003e47×37 mm profile with channel for M8 and cable routing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibilities\u003c\/h3\u003e\u003cp\u003eCompatible with 30\/35 mm end and mid clamps, rail connectors, clips\/grounding kit, UV cable glands, and EPDM protectors under the rail. Maintain row spacing according to \u003cem\u003etilt\u003c\/em\u003e and the height of the upper edge of the module to avoid shading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlat Roof Aluminum Structure for 7 Panels\u003c\/strong\u003e ensures a clean and professional installation, optimizes available space, and improves the overall efficiency of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502763901269,"sku":"ELEKEST041","price":297.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SUELO-1_f796b549-26b5-4878-8c2f-ae5aea8e47e8.png?v=1762625725"},{"product_id":"estructura-aluminio-suelo-plano-8-paneles-inclinacion","title":"Aluminum Structure Flat Ground 8 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFlat Roof Aluminum Structure for 8 Panels\u003c\/strong\u003e is designed to mount a continuous row of eight photovoltaic modules on flat surfaces with complete safety. Manufactured from anodized aluminum and stainless steel fasteners, it combines quick installation, structural stability, and corrosion resistance, offering \u003cstrong\u003e15º\/20º\/30º tilt\u003c\/strong\u003e to optimize solar capture and minimize shading between rows.\u003c\/p\u003e\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 8 modules with 30–35 mm frame (landscape recommended; portrait supported).\u003c\/li\u003e\n\u003cli\u003eAluminum profiles with 47×37 mm rail type and channel for M8 hammer screw.\u003c\/li\u003e\n\u003cli\u003eAvailable angles: 15º, 20º, or 30º using interchangeable leg sets.\u003c\/li\u003e\n\u003cli\u003eAnchoring to support with M10 bolts (chemical or expansion) on slab\/flat roof.\u003c\/li\u003e\n\u003cli\u003eStainless steel A2\/A4 fasteners and equipotential bonding points for grounding.\u003c\/li\u003e\n\u003cli\u003eRail connectors for structural continuity and even load distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast and precise assembly thanks to continuous rails and universal clamps.\u003c\/li\u003e\n\u003cli\u003eHigher annual yield by ensuring the optimal working angle.\u003c\/li\u003e\n\u003cli\u003eHigh rigidity against wind and snow due to continuous rails and dimensioned supports.\u003c\/li\u003e\n\u003cli\u003eSuperior durability in marine and industrial environments (anodized aluminum + stainless steel).\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance: visual inspection and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\u003cp\u003eSuitable for residential, commercial \u003cem\u003eand\u003c\/em\u003e industrial installations on technical rooftops, walkable flat roofs, and concrete slabs. Appropriate for self-consumption and modular solar fields where reliability and standardization are sought.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003eFixed 15º \/ 20º \/ 30º\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum profiles; stainless steel A2\/A4 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchoring to support\u003c\/td\u003e\n\u003ctd\u003eM10 bolts (chemical or expansion) on slab\/flat roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule orientation\u003c\/td\u003e\n\u003ctd\u003eLandscape recommended; portrait compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail\u003c\/td\u003e\n\u003ctd\u003e47×37 mm profile with channel for M8 and cable routing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibilities\u003c\/h3\u003e\u003cp\u003eCompatible with 30\/35 mm end and intermediate clamps, rail connectors, clips\/grounding kit, UV cable glands, and EPDM protectors under the rail. Maintain row spacing according to \u003cem\u003etilt\u003c\/em\u003e and the height of the upper edge of the module to avoid shading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlat Roof Aluminum Structure for 8 Panels\u003c\/strong\u003e ensures a clean and professional installation, optimizes available space, and improves the overall efficiency of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502764196181,"sku":"ELEKEST042","price":309.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SUELO-1_0f96aea6-1901-4261-b105-2b37e6ccde90.png?v=1762625727"},{"product_id":"estructura-aluminio-suelo-plano-9-paneles","title":"Aluminum Structure Flat Ground 9 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFlat Roof Aluminum Structure for 9 Panels\u003c\/strong\u003e is designed to mount a continuous row of nine photovoltaic modules on flat surfaces with complete safety. Manufactured from anodized aluminum and stainless steel fasteners, it combines quick installation, structural stability, and corrosion resistance, offering \u003cstrong\u003e15º\/20º\/30º tilt\u003c\/strong\u003e to optimize solar capture and minimize shading between rows.\u003c\/p\u003e\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 9 modules with 30–35 mm frame (landscape recommended; portrait supported).\u003c\/li\u003e\n\u003cli\u003eAluminum profiles with 47×37 mm rail type and channel for M8 hammer screw.\u003c\/li\u003e\n\u003cli\u003eAvailable angles: 15º, 20º, or 30º using interchangeable leg sets.\u003c\/li\u003e\n\u003cli\u003eAnchoring to support with M10 bolts (chemical or expansion) on slab\/flat roof.\u003c\/li\u003e\n\u003cli\u003eStainless steel A2\/A4 fasteners and equipotential bonding points for grounding.\u003c\/li\u003e\n\u003cli\u003eRail connectors for structural continuity and even load distribution over long sections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast and precise assembly thanks to continuous rails and universal clamps.\u003c\/li\u003e\n\u003cli\u003eHigher annual yield by ensuring the optimal working angle.\u003c\/li\u003e\n\u003cli\u003eHigh rigidity against wind and snow due to rail continuity and dimensioned supports.\u003c\/li\u003e\n\u003cli\u003eSuperior durability in marine and industrial environments (anodized aluminum + stainless steel).\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance: visual inspection and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\u003cp\u003eSuitable for residential, commercial, \u003cem\u003eand\u003c\/em\u003e industrial installations on technical rooftops, walkable flat roofs, and concrete slabs. Appropriate for self-consumption and modular solar fields where reliability, standardization, and ease of maintenance are required.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003eFixed 15º \/ 20º \/ 30º\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum profiles; stainless steel A2\/A4 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchoring to support\u003c\/td\u003e\n\u003ctd\u003eM10 bolts (chemical or expansion) on slab\/flat roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule orientation\u003c\/td\u003e\n\u003ctd\u003eLandscape recommended; portrait compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail\u003c\/td\u003e\n\u003ctd\u003e47×37 mm profile with channel for M8 and cable routing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibilities\u003c\/h3\u003e\u003cp\u003eCompatible with 30\/35 mm end and intermediate clamps, rail connectors, clips\/grounding kit, UV cable glands, and EPDM protectors under the rail. Maintain row spacing according to \u003cem\u003etilt\u003c\/em\u003e and the height of the upper edge of the module to avoid shading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlat Roof Aluminum Structure for 9 Panels\u003c\/strong\u003e ensures a clean and professional installation, optimizes available space, and improves the overall efficiency of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502764360021,"sku":"ELEKEST043","price":362.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SUELO-1_46a13419-172d-421e-8eb6-c699cebb368a.png?v=1762625729"}],"url":"https:\/\/aurensol.com\/en\/collections\/estructuras-suelo-tejado-plano.oembed","provider":"Aurensol","version":"1.0","type":"link"}