Victron Blue Smart IP22 24/8 (1) | Ideal for lithium and lead
Modelo: Blue Smart IP22 24/8 (1)- Sku: VICTCAR016
- Vendor: Victron
Specifications
Product Description
The Victron Blue Smart IP22 24/8 (1) is a professional 24 V, 8 A charger that combines high efficiency, Bluetooth connectivity, and intelligent charge management to extend the life of your batteries. Its adaptive 6-stage algorithm applies the appropriate voltage and current at each phase (test, bulk, absorption, reconditioning, float, and storage), reducing stratification and preventing overcharging in both lead-acid batteries (AGM, GEL, and flooded) and LiFePO₄ with BMS. With VE.Smart Networking, it can synchronize with Victron sensors and monitors to compensate for voltage drop at terminals and the actual battery temperature, achieving unmatched precision. Its IP22 format, compact and silent (Night/Low mode), makes it perfect for electrical panels in boats, campers, machinery, and 24 V solar systems.
Main Features
- 8 A at 24 V on a single output for controlled and efficient charging.
- Intelligent 6-stage algorithm with automatic storage mode for prolonged maintenance.
- Integrated Bluetooth Smart: monitor, adjust parameters, and update firmware from VictronConnect.
- VE.Smart network to share voltage/temperature/current with Smart Battery Sense, SmartShunt, or BMV-712.
- Recovery of deeply discharged batteries (attempt from 0 V) and reconditioning phase for lead-acid.
- Night/Low mode for silent operation and current reduction when required.
Advantages or Benefits
- Extends the service life of the 24 V bank by avoiding undercharging, overcharging, and overheating.
- Total control from your mobile: session history, alarms, and profiles by chemistry.
- Professional safety with protections against reverse polarity (fuse), short circuit, and overtemperature.
- Compact and clean installation; ideal for continuous use in vehicles, marine, and solar systems.
- High efficiency and minimal standby consumption, reducing losses and energy cost.
Purpose or Applications
Recommended for 24 V service and starter batteries in campers, boats, light machinery, UPS/backup, and small photovoltaic installations with a single bank. Suitable as a main or maintenance charger for LiFePO₄ with BMS.
Technical Specifications
| Output Voltage / Current | 24 V / 8 A (1 output) |
| Charging Algorithm | 6 stages + storage (with reconditioning) |
| Chemical Compatibility | Lead-acid (AGM, GEL, flooded) and LiFePO₄ |
| AC Input | 180–265 V AC, 45–65 Hz |
| Efficiency / Standby | ≈93 % / ≈0.5 W |
| Modes | Night / Low (current reduction and silent operation) |
| Communications | Bluetooth Smart and VE.Smart Networking |
| Protection Rating | IP22 |
| Thermal Range | −40 °C to +60 °C (nominal output up to ~40 °C) |
| Connections | Screw terminals up to 16 mm²; AC cable ~1.5 m |
| Dimensions / Weight | 235 × 108 × 65 mm / ~1.3 kg |
Compatibilities
Victron ecosystem: Smart Battery Sense, SmartShunt, BMV-712 Smart, wall mounts, and ring terminal cables. Possible VE.Smart synchronization in parallel with other IP22 units to increase total current.
The Victron Blue Smart IP22 24/8 (1) provides precision, safety, and connectivity to keep your 24 V bank always under control.
Descargar ficha técnica
View full details
Have a question?
Victron Blue Smart IP22 24/8 (1) | Ideal for lithium and lead
