Lorentz PU600 CS-17-1 Replacement Diffuser Insert Fig.7
Modelo: 35-000060 Diffuser insert, For PE CS-17-1- Sku: LOREREP045
- Vendor: Lorentz
Specifications
Product Description
The Difusor Insert Lorentz PU600 CS-17-1 Fig.7 is the fixed insert that guides the flow at the outlet of the impeller, converting the velocity generated by the turbine into useful pressure with lower losses. Its precise coupling with the impeller (Fig.6) and the housing ensures nominal performance, reduces turbulence, and helps control cavitation, which is key for continuous operation in filtration and solar pumping.
Main Features
- Original Lorentz replacement designed for PU600 CS-17-1 (position Fig.7).
- Diffusion channels that stabilize the flow and improve pressure recovery.
- Factory tolerances for exact alignment with the impeller and end flange.
- Low-roughness internal surface to minimize friction losses.
- Durable material for continuous service in filtration and recirculation systems.
- Direct installation without machining, compatible with gaskets indicated in the exploded view.
Advantages or Benefits
- Higher hydraulic efficiency: better energy conversion and stable flow rate.
- Protects the impeller by reducing recirculation and microcavitation.
- Lower energy consumption as the pump operates at its design point.
- Reduces noise and vibrations by stabilizing the outlet jet.
- Extends the life of the hydraulic assembly by limiting unnecessary stress.
Purpose or Applications
Recommended when, despite having an impeller in good condition, the pump shows pressure drop, hydraulic noise, or unstable flow due to wear, cracks, or deformation of the diffuser. Ideal for solar filtration units, swimming pools, and recirculation circuits using the PU600 CS-17-1 model.
Technical Specifications
| Compatible model | Lorentz PU600 CS-17-1 (Pump End) |
| Position in exploded view | Fig.7 – Diffuser Insert / Difusor |
| Function | Pressure recovery and flow guidance after the impeller |
| Interface | Impeller (Fig.6), housing, end flange, and associated gaskets |
| Maintenance | Inspect channels; replace if there is erosion, deformation, or deposits |
| Material | High-strength technical polymer (original replacement) |
| Best practices | Use a clean pre-filter and proper priming to avoid cavitation |
Compatibilities
Direct use in the Lorentz PU600 CS-17-1 pump. At the application level, compatible with solar filtration units and filtration systems that use this model. Always confirm the exploded view figure and reference before purchasing the replacement part.
The Difusor Insert Lorentz PU600 CS-17-1 Fig.7 restores pressure, reduces losses, and ensures quiet and efficient operation in your solar pumping installation.
Have a question?
Lorentz PU600 CS-17-1 Replacement Diffuser Insert Fig.7
