Lorentz PU600 CS-17-1 Replacement Turbine Impeller Fig.6
Modelo: 35-000070 Impeller, For PE CS-17-1- Sku: LOREREP044
- Vendor: Lorentz
Specifications
Product Description
The Lorentz PU600 CS-17-1 Fig.6 Impeller Turbine is the original impeller responsible for transforming shaft energy into hydraulic energy within the pump. Specifically designed for the PU600 assembly, it restores the nominal flow rate and pressure when the impeller is worn, eroded by solids, or unbalanced. Its precise fit with the end flange, diffuser, and housing maintains system efficiency and prevents unwanted noise or vibrations.
Main Features
- Original Lorentz replacement for PU600 CS-17-1 (position Fig.6 in the exploded view).
- Blade geometry optimized for stable flow and low cavitation.
- Dynamically balanced to reduce vibrations and protect bearings and seal.
- Direct coupling to the motor shaft via the specified drive parts.
- Dimensional compatibility with the Diffuser Insert (Fig.7) for joint performance.
- Constructed from technical polymer resistant to treated water and continuous use.
Advantages or Benefits
- Restores original hydraulic performance (flow rate and head).
- Reduces consumption and temperature by operating the pump at its optimal point.
- Reduces noise, vibrations, and wear due to imbalance or erosion of the old impeller.
- Simple maintenance: direct replacement with factory tolerances.
- Longer life for the mechanical seal and bearings by minimizing radial stresses.
Purpose or Applications
Recommended when a drop in flow/pressure, noise, imbalance, or erosion on the leading edge of the blades is observed. Suitable for solar pool filters, recirculation circuits, and small pumping systems associated with photovoltaic installations using the PU600 series.
Technical Specifications
| Compatible model | Lorentz PU600 CS-17-1 (Pump End) |
| Position in exploded view | Fig.6 – Turbine / Impeller |
| Function | Generation of kinetic and pressure energy to the fluid |
| Interface | Motor shaft/sleeve, diffuser (Fig.7), housing, and end flange |
| Maintenance | Visual inspection of blades; replace if there is wear, impact, or cracks |
| Material | High-strength technical polymer (original replacement) |
| Best practices | Avoid dry running; clean pre-filter to reduce abrasion |
Compatibilities
Direct use in the Lorentz PU600 CS-17-1 pump. At the application level, suitable for solar filters and filtration circuits using this model. Check the reference and exploded view figure before purchase.
The Lorentz PU600 CS-17-1 Fig.6 Impeller Turbine restores your system’s flow and stability as expected, with a perfect fit and the reliability of an original replacement part.
Have a question?
Lorentz PU600 CS-17-1 Replacement Turbine Impeller Fig.6
